Equipos de laboratorio

Hot Air Oven

These are sturdy double walled units with outer chamber made of M.S. sheet duly enamel painted with inner chamber made up of anodized aluminum or S.S. sheet of SS-304 grade. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by hydraulic type capillary thermostat from ambient to 250°C ± 0.5° C An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. To work on 220/230 volts A.C.supply. Available in following Inner Chamber sizes(W x D x H) :

a) 300x300x300 mm (28 Ltrs.)
b) 355x355x355 mm (45 Ltrs.)
c) 455x455x455 mm (95 Ltrs.)
d) 455x455x605 mm (125 Ltrs.)
e) 605x605x605 mm (224 Ltrs.)
f) 605x455x910 mm (252 Ltrs.)
g) 605x605x910 mm (336 Ltrs.)
 
 
.
     

LABE 1202

Incubator

.
 
These incubators are double walled units with outer chamber made of M.S. sheet duly enamel painted with inner chamber made up of anodized aluminum or S.S. sheet of SS-304 grade. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat from ambient to 70° C ± 0.5° C An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. To work on 220/230 volts A.C.supply. Available in following Inner Chamber (W x D x H) sizes:

a) 300x300x300 mm (28 Ltrs.)
b) 355x355x355 mm (45 Ltrs.)
c) 455x455x455 mm (95 Ltrs.)
d) 455x455x605 mm (125 Ltrs.)
e) 605x605x605 mm (224 Ltrs.)
f) 605x455x910 mm (252 Ltrs.)
g) 605x605x910 mm (336 Ltrs.)
     

LABE 1203

BOD Incubator

.
 
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber of aluminum or S.S. and outer wall of M.S. Sheet duly degreased and pre treated with primers for rust proofing duly painted with attractive stove enamel or powder coated . The gap between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber. Full view inner glass/perspex door permits inspection of specimens, without disturbing the chamber temperature. Lock and Key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is consists of a sturdy compressor/cooling kit. The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230V A.C. supply. Temperature from 5° C to 60° C is controlled by SOLID STATE ELECTRONIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTOLLER, with an accuracy of ± 0.5°C. Available in following Inner Chamber sizes:

a) 455x610x410 mm (4.0 Cu.ft., 112 Ltrs)
b) 505x830x415 mm (6.1 Cu.ft., 171 Ltrs)
c) 570x875x550 mm (10 Cu.ft., 280 Ltrs)
d) 650x900x550 mm (12 Cu.ft., 336 Ltrs)
     

LABE 1204

Vacuum Oven

.
 
These are double walled cylindrical units with outer made of M.S. sheet duly enamel painted and Inner made up of heavy gauge S.S. Sheet. Gap between the two walls is duly filled with high grade glass wool to avoid thermal loss. Temperature range from 50 ° C to 150 ° C is Controlled by heavy duty thermostat with an accuracy of ± 1 ° C. It is capable of withstanding a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 volts A.C. supply. But without Vacuum pump. Available in following sizes:

a) 200 x 200 mm
b) 250 x 250 mm
c) 250 x 300 mm
d) 300 x 300 mm
e) 300 x 500 mm
     

LABE 1205

Water Bath

.
 
This bath is suitable to maintain constant desired temperature for heating flasks in Chemical Laboratories. Bath is double walled inside made of stainless steel & outer body made of mild steel sheet painted with attractive Epoxy coated. The gap between the walls is filled with glass wool to minimize the loss of temperature. The stainless steel nozzles are provided one for inlet and second for over flow of water. The top of the bath has concentric rings. Available in following sizes:

a) 325*250*100 mm (6 holes of 3" dia.)
b) 325*300*100 mm (9 holes of 3" dia.)
c) 425*325*100 mm (12 holes of 3" dia.)
Also available in single wall
     

LABE 1206

Serological Water Bath

.
 
This bath is suitable for Wasserman, Kolmer & Kahn test inactivation, paraffin Embedding & many other application in the Laboratories, Hospital & Industries. Serological Water bath is double walled outer body made of mild steel sheet painted with attractive Epoxy coated & inside chamber made of stainless steel. The gap between the walls is filled with glass wool to minimize the loss of temperature. The serological water bath is provided with a S.S. drain plug to facilitate easy emptying & cleaning of the inner chamber when ever necessary. Bath consists of dome cover & perforated removable shelf. Available in following internal sizes:

300 x 250 x 175mm (Suitable for 2 racks)(14 Ltrs)
330 x 300 x 175mm (Suitable for 4 racks)(18 Ltrs)
455 x 300 x 175mm (Suitable for 6 racks)(25 Ltrs)
605 x 300 x 175mm (Suitable for 8 racks)(32 Ltrs)
 
 

LABE 1207

Water Distillation Unit (Wall Type)

.
 
These Water distillers produce highly treated and disinfected water for laboratory usage. The distillation process removes minerals and microbiological contaminants and can reduce levels of chemical contaminants. A water distiller works by boiling water into water vapour, condensing it and then returning it to its liquid state. It is collected in a storage container. Made of heavy gauge stainless sheet inside and outside, with immersion type heaters. The still provides continuous supply of pyroxene free distilled water and is equipped with brackets for wall mounting plug and cord and connector. Available in following capacities:

1) 2 Ltr/hour (wattage 2KW)
2) 4 Ltr/hour (wattage 4KW)
3) 6 Ltr/hour (wattage 4.5KW)
4) 8 Ltr/hour (wattage 6KW)
     

LABE 1208

Water Distillation Unit (Table Type)

.
 
These Water distillers produce highly treated and disinfected water for laboratory usage. The distillation process removes minerals and microbiological contaminants and can reduce levels of chemical contaminants. A water distiller works by boiling water into water vapour, condensing it and then returning it to its liquid state. It is collected in a storage container. A free standing unit capable of producing pyrogen free distilled water as per IP/BP standards .All contact parts are made of stainless steel mounted on a sturdy MS tubular stand. Available in following capacities:

1) 2 Ltr/hour (wattage 2KW)
2) 4 Ltr/hour (wattage 4KW)
3) 6 Ltr/hour (wattage 4.5KW)
4) 8 Ltr/hour (wattage 6KW)
5) 10 Ltr/hour (wattage 10KW)
6) 15 Ltr/hour (wattage 12KW)
7) 20 Ltr/hour (wattage 15KW)
     

LABE 1209

Hot Plate

.
 
Outer body made of Mild steel duly painted / powder coated. Heavy duty cast iron top. Fitted with Energy Control. Available in round and rectangular top in the following sizes:

1) Hot Plate (Round) Diameter 8" inch
2) Hot Plate (Rectangular) 10"x12"
3) Hot Plate (Rectangular) 10"x16"
4) Hot Plate (Rectangular) 12"x18"
5) Hot Plate (Rectangular) 18"x24"
     

LABE 1210

Muffle Furnace

.
 
Outer casing is made of double walled Mild steel duly powder coated. The gap between to two walls is filled with ceramic blanket insulation to prevent heat loss. There is a grooved refractory chamber which has kanthal heating element fitted on three side to provide quick heating. Silicon rods are provided in case of high temperature (above 1350°C). Temperature can be controlled using a pyrometer or using digital controls. Available in temperature of 1000°C, 1200°C and above. Inner chambers are of following sizes (in inches):

1)4"x4"x9"
2)5"x5"x10"
3)6"x6"x12"
4)8"x8"x12"

 

  • Outer casing is made of double walled thick CRC / Mild steel sheet duly powder coated.
  • Better ceramic Blanket provides high Temp. Insulation to avoid heat loss.
  • Inside chamber construction includes a long life grooved refractory chamber to support Kanthal heating Element on 3 sides through its walls. Its feature include: quick Temperature rising, & constant Temperature.
  • Better Precise Digital Temperature Controller Cum Indicator having Alarm facility at high Temp. Easy operation.
  • Kanthal A-1 Super quality Coil shaped Heaters duly wounded (in case of 900°C Temp.) & in case of 1200°C range coil shaped open heater is of heavy gauge to stand continuous Temp. up to 1150°C.
  • Silicon Rods are provided in case of High Temp. (1350°C) Furnace, supplied with Transformer unit & Pt-Pt RH Thermocouple.
  • Unique design of ventilation provided at the back for Fumes outlet
Model
LABE 1210
A
LABE 1210
B
LABE 1210
C
LABE 1210
D
Interior (mm)
100 x 100 x 225
4" x 4" x 9"
125 x 125 x 250
5" x 5" x 10"
150 x 150 x 300
6" x 6" x 12"
200 x 200 x 300
8" x 8" x 12'

Heater Wattage "W"

900°C/ 1.5 KW
1150°C/ 2.5 KW
900°C/2.0 KW
1150°C/ 3.0 KW
900°C/ 3.5 KW
1150°C/ 4.0 KW
900°C/ 4.5 KW
1150°C/ 4.5 KW

* Dimensions are expressed in (Width x Depth x Height)

Technical Parameters:

Control Panel : Mains, Load Indicator , Sunvic (ER) Regulator & Mains Indicator, Temp. controller.
Temperature Range :

Ambient to 900 °C
Ambient to 1150 °C
Ambient to 1350 °C

Temperature Stability : +-2°C or better
Duty Cycle : Continuous
Insulation : High Ceramic Blanket & Board Insulation
Housing Material : CRC / Mild Steel Sheet duly Powder Coated
Optional : Outer body of S.S 304 grade (Can be made against order)
Interior : Ceramic Board & Grooved Refractory Chamber as per Temp. Requirement
I/P Power Single Phase 220/230V, AC +- 10% 50Hz & 3 phase 440V
Optional : RS 232 Communication interface

Colombia

Calle 51 No 5 - 56 Chapinero 
Nuevo +57 1 288 02 03
 +57 1 338 1226
  Bogota Colombia
ventas@topoequipos.com

Panamá

  Av Balboa, Edificio Plaza 
  (507) 263 3087
  (507) 263 3724
  panama@topoequipos.com

Perú

Av. Aramburu No 920 OF 202 
  San Isidro
  (511) 421-6165/222-6102
 
992724084 / 992722730
peru@topoequipos.com